My project to build and program

[krolikbest]

Hi,
at the end of last year I started my amateur project to build and program laser and  engraver machine but small in terms of dimensions. The first I wanted to do was to create application to deal with vectors, but without any extrenal library/ies, so from scratch everything started. There you can see my result (so far): https://www.youtube.com/watch?v=X2ojIqAhlfA
Still to do:
- to complete manipulating of splines (achievable in reasonably time)
- project is meant to read and save in svg format (as I like to work with Inkscape). I have done the reading of this format (with limitations but in most cases it is sufficient). The saving is not yet done. Some ideas?
- generating code from table of vectors for cnc, I'm more or less grasping the topic (I did something similar years ago)
- to build laser engraver machine

[MarkMLl]

- to build laser engraver machine

These days that's relatively simple, because of the ready availability of various aluminium extrusions, bearings, leadscrews and so on. Also you can get controller boards off-the-shelf, but I'd suggest (a) getting one that supports an extra axis and (b) sticking to one of the mainstream firmwares since they have benefited from many developers' work over the last ten years or so.

About ten years ago I acquired a CNC-converted Myford lathe, but got bogged down in trying to find a way to run the original software on the obsolete PC that accompanied it.

About 40 years ago the department for which I worked acquired a big multi-axis CNC mill from Lucas which had been used to make headlamp lens patterns. Nobody even tried to do anything with it...

MarkMLl

[krolikbest]

I'm making an uphill climb

[Curt Carpenter]

I suspect you're having a lot of fun -- and I salute your spirit of adventure!

[zamtmn]

krolikbest
It might be worth taking a look at zcad https://github.com/zamtmn/zcad

[krolikbest]

I've seen your excellent app.Finally today I finished splines (I'm very happy about that) and really respect to you, knowing now how much time you had to spend on this, I mean your z-cad of course. However my goal is to create simple app for correction drawings imported from Inkscape before finally (after some aditionally processing) sending them to my engraver. The control of this machine is (to be precise-will be) also handled by my program.

[krolikbest]

Finally I was able to complete the engraving/milling machine. One little step forward to make it also a laser engraver but from software perspective the project is completed. The result you can see here:https://www.youtube.com/watch?v=5dVofDOM1f8.

Regards,
Martin

PS
The language you hear it is Polish, my native.

[dbannon]

OK, so, ordinarily, I would not click on a posted UTube link but glad I did.

Wow, that is so cool !  I have no Polish but towards the end, got to see the machine do its stuff ! Well done.

Davo

[krolikbest]

Glad you like it.
Btw. who wants a Lazarus logo emblem ?