Recent

Author Topic: FPC-AVR hex file does not make LED blink  (Read 11877 times)

ccrause

  • Hero Member
  • *****
  • Posts: 592
Re: FPC-AVR hex file does not make LED blink
« Reply #15 on: December 14, 2021, 06:47:19 pm »
Hey www.freepascal.org crew!
Can somebody advice me the right values of

i2c_master.start(0, false);

and if it has to be placed in the main program loop or just like above ?
Greets, Wouter van Wegen

Typically you should use the address of the I2C device you want to communicate with. Using address 0 is the general call address, which may or may not be what you are trying to do.

There is a simple example to show how to read time from a DS1307.

Quote
PS: I am trying to I2C from my RPI3 on freepascal to my AVR on freepascal FPC-AVR
To do this one side needs to be the I2C master and the other side the slave.  The I2C library you are referring to is for the AVR acting as the I2C master.  If you want to use this, then the AVR needs to read data from the RPi, so the RPi needs to be running an I2C slave app.  There are quite a number of discussions on this topic if you search for Raspberry Pi as I2C slave.

But it will be easier in my opinion if you get a cheap I2C device such as a DS1307 real time clock, there are many examples on the internet on how to read this via I2C.

 

TinyPortal © 2005-2018