Recent

Author Topic: Lazarus Release 2.0.0  (Read 126741 times)

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #120 on: March 16, 2019, 09:57:49 pm »
I uninstalled last 2.o install, did a new fresh install using new cfg.

The KConrols package installed, but the controls are not on the tool palette. Shouldn't there be a Control tab with tool buttons??

All the other issues are the same.
« Last Edit: March 16, 2019, 10:38:52 pm by technipixel »
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #121 on: March 16, 2019, 10:41:41 pm »
Here is the screen of inspector window and other error message besides "can't find TlzRichEdit"
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

Cyrax

  • Hero Member
  • *****
  • Posts: 836
Re: Lazarus Release 2.0.0
« Reply #122 on: March 16, 2019, 10:56:41 pm »
Open the package file of TlzRichEdit and remove its own dependency from the list.

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #123 on: March 16, 2019, 11:02:50 pm »
Laz can't find the LzRichEdit at all. I am not sure what it's real name is called or where it is.
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #124 on: March 16, 2019, 11:04:37 pm »
Installed RichMemo to see if I can fin LzRichEdit, it installed but no button show up on tool palette
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

dbannon

  • Hero Member
  • *****
  • Posts: 2778
    • tomboy-ng, a rewrite of the classic Tomboy
Re: Lazarus Release 2.0.0
« Reply #125 on: March 16, 2019, 11:24:36 pm »
The KConrols package installed, but the controls are not on the tool palette. Shouldn't there be a Control tab with tool buttons??

Are you sure its not just too far to the right to see ?   There is a little icon, far right hand side, just below the tool bar that allows you to see the whole list....

I routinely use kcontrols, works fine on four 2.0.0 platform I use.

Davo
Lazarus 2, Linux (and reluctantly Win10, OSX)
My Project - https://github.com/tomboy-notes/tomboy-ng and my github - https://github.com/davidbannon

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #126 on: March 16, 2019, 11:34:07 pm »
The KConrols package installed, but the controls are not on the tool palette. Shouldn't there be a Control tab with tool buttons??

Are you sure its not just too far to the right to see ?   There is a little icon, far right hand side, just below the tool bar that allows you to see the whole list....

I routinely use kcontrols, works fine on four 2.0.0 platform I use.

Davo

see the screen above, there are no KControls on it.
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #127 on: March 16, 2019, 11:36:26 pm »
And no, they are not on the "Common Controls" tab either
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

dbannon

  • Hero Member
  • *****
  • Posts: 2778
    • tomboy-ng, a rewrite of the classic Tomboy
Re: Lazarus Release 2.0.0
« Reply #128 on: March 16, 2019, 11:49:19 pm »
Sorry, cannot find the screen you mention.

But KControls appear in their own tab of the tool bar, its labelled 'TK' and is added at the far right. So if you don't have a quite high res screen, it appears beyond the Lazarus border and you cannot see it. Can you click that small icon I mentioned, near right hand edge, two small stacked triangles pointing down ?

Davo
Lazarus 2, Linux (and reluctantly Win10, OSX)
My Project - https://github.com/tomboy-notes/tomboy-ng and my github - https://github.com/davidbannon

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #129 on: March 16, 2019, 11:51:44 pm »
No, you have to scroll on the page to see the far right.
There is no TK tab.... but it doesn't matter.

KConrols and its web site is going down this May... per...

http://www.tkweb.eu/en/delphicomp/

So, I will have to find an alternative to KMemo.

« Last Edit: March 16, 2019, 11:57:07 pm by technipixel »
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

wp

  • Hero Member
  • *****
  • Posts: 11830
Re: Lazarus Release 2.0.0
« Reply #130 on: March 16, 2019, 11:52:59 pm »
see the screen above, there are no KControls on it.
And no, they are not on the "Common Controls" tab either
Did you once play with the arrangement of icons on the tool palette? I mean "Tools" > "Options" > "Environment" > "Component Palette"; you can change the assignment of components to palettes here. This function gets in trouble when you uninstall a package for which you have displaced the icons this ways. Click on the button "Restore defaults" to reset the icon assignments. It recovers the lost icon issue.

So, I will have to find an alternative to KMemo.
Why don't you use the version distributed by the Online-Package-Manager? It is working, for sure.
« Last Edit: March 16, 2019, 11:55:09 pm by wp »

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #131 on: March 16, 2019, 11:53:56 pm »
So, seeing I can't get TlzRichEdit to install.... HOW do I remove all references in my project so I can at least display the form.
When the control doesn't load, it won't allow you to edit the form.
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

pixelink

  • Hero Member
  • *****
  • Posts: 1260
Re: Lazarus Release 2.0.0
« Reply #132 on: March 16, 2019, 11:56:16 pm »
see the screen above, there are no KControls on it.
And no, they are not on the "Common Controls" tab either
Did you once play with the arrangement of icons on the tool palette? I mean "Tools" > "Options" > "Environment" > "Component Palette"; you can change the assignment of components to palettes here. This function gets in trouble when you uninstall a package for which you have displaced the icons this ways. Click on the button "Restore defaults" to reset the icon assignments. It recovers the lost icon issue.

 I didn't play with the arrangement... I am just installing a fresh copy and I leave all settings alone.

I did go check though. And TK is not listed on available tabs to add.
Can't Type - Forgetful - Had Stroke = Forgive this old man!
LAZ 2.2.0 •  VSSTUDIO(.Net) 2022 • Win10 • 16G RAM • Nvida GForce RTX 2060

wp

  • Hero Member
  • *****
  • Posts: 11830
Re: Lazarus Release 2.0.0
« Reply #133 on: March 16, 2019, 11:57:46 pm »
Open the lfm file in a external editor and delete the part refering to the richedit. This will allow you to load the form into Lazarus again.

Absolutely, make a backup copy of the lfm file before you edit it manually!

wp

  • Hero Member
  • *****
  • Posts: 11830
Re: Lazarus Release 2.0.0
« Reply #134 on: March 17, 2019, 12:00:40 am »
I did go check though. And TK is not listed on available tabs to add.
Did TK install correctly? Were there any error messages? Open "Package" > "Install/uninstall packages". If it was installed successfully the packages KControlsBase and KControlsLaz should be listed in the left list without a '+' overlay icon.

I am just installing a fresh copy and I leave all settings alone.
And did you install into a fresh user configuration folder? Are you sure that you did not mix your old configuration files with the new installation?
« Last Edit: March 17, 2019, 12:02:15 am by wp »

 

TinyPortal © 2005-2018