Recent

Author Topic: Fpcupdeluxe  (Read 458582 times)

josh

  • Hero Member
  • *****
  • Posts: 789
Re: Fpcupdeluxe
« Reply #1680 on: August 24, 2020, 03:03:55 pm »
TRUNK is now workimg, SVN Revision is
Lazarus 2.1.0 r63821 FPC 3.3.1 x86_64-win64-win32/win64
Development Installation Lazarus 1.3, FPC 2.7.1,Windows 7/8 32/64, OSX, *nix

Test Environment Lazarus & FPC Trunk on Windows and OSX (Cocoa Mainly on OSX). Testing also Crosscompile windows to OSX.. 
Any posts made from 2015 will be based on Lazarus Trunk.

Zvoni

  • Sr. Member
  • ****
  • Posts: 408
Re: Fpcupdeluxe
« Reply #1681 on: September 03, 2020, 04:34:54 pm »
Don, i followed the steps on your github for osxcross, and i'm getting the following error:
Code: [Select]
In file included from macosx_deployment_target.c:29:
../include/foreign/sys/sysctl.h:2:15: fatal error: 'sys/sysctl.h' file not found
#include_next <sys/sysctl.h>
Any ideas?
One System to rule them all, One IDE to find them,
One Code to bring them all, and to the Framework bind them,
in the Land of Redmond, where the Windows lie
---------------------------------------------------------------------
People call me crazy, because i'm jumping out of perfectly fine aircraft

totya

  • Hero Member
  • *****
  • Posts: 636
Re: Fpcupdeluxe
« Reply #1682 on: September 06, 2020, 05:55:38 pm »
Trying to update fixes of fpc and laz and getting the below error. This is a clean install in new folder.  1.8.0e
win 10 64bit

Hi, today I want to install fixes/fixes branch, and I got similar errors.
FPC compile is success, but Lazarus compile doesn't.
But the problem is the fpc fixes branch, because if I set fpc fixes branch to rev. 45746, fpc fixes, after Lazarus fixes compiled without problem.

Perhaps the problem is the crosscompiler with the never fpc version.
edit.: my stupidity... If I set x86_64 and Windows in the cross tab, then I click to "install compiler", I got "No valid CPU / OS  crosscompiler found". So, something wrong...


« Last Edit: September 07, 2020, 05:04:32 pm by totya »

Zvoni

  • Sr. Member
  • ****
  • Posts: 408
Re: Fpcupdeluxe
« Reply #1683 on: September 07, 2020, 12:08:46 pm »
Trying to update fixes of fpc and laz and getting the below error. This is a clean install in new folder.  1.8.0e
win 10 64bit

Hi, today I want to install fixes/fixes branch, and I got similar errors.
FPC compile is success, but Lazarus compile doesn't.
But the problem is the fpc fixes branch, because if I set fpc fixes branch to rev. 45746, fpc fixes, after Lazarus fixes compiled without problem.

Perhaps the problem is the crosscompiler with the never fpc version.
If I set x86_64 and Windows in the cross tab, then I click to "install compiler", I got "No valid CPU / OS  crosscompiler found".
So, something wrong...
If you're on Win10-64-Bit, why do you need a cross-compiler for Win-64Bit?
One System to rule them all, One IDE to find them,
One Code to bring them all, and to the Framework bind them,
in the Land of Redmond, where the Windows lie
---------------------------------------------------------------------
People call me crazy, because i'm jumping out of perfectly fine aircraft

totya

  • Hero Member
  • *****
  • Posts: 636
Re: Fpcupdeluxe
« Reply #1684 on: September 07, 2020, 05:08:27 pm »
If you're on Win10-64-Bit, why do you need a cross-compiler for Win-64Bit?

You all right, it's my fault. My fault reason is, very long time I installed x86 version by default, with x64 compiler (fpcdeluxe do it autmatically). I forget at the moment I use x64 version with x86 cross compiler. :) Otherwise I use win7 x64.

But the main problem is stay, latest fixes/fixes install is impossible at the moment as I wrote on x64 with x86 cross compiler.

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1345
Re: Fpcupdeluxe
« Reply #1685 on: September 08, 2020, 03:29:35 pm »
I can confirm that fixes/fixes is a no-go at the moment !
Looking into it right now. It seems that FPC cannot find its own config file. Reason unknown [yet].

Zvoni

  • Sr. Member
  • ****
  • Posts: 408
Re: Fpcupdeluxe
« Reply #1686 on: September 09, 2020, 07:52:36 am »
I can confirm that fixes/fixes is a no-go at the moment !
Looking into it right now. It seems that FPC cannot find its own config file. Reason unknown [yet].
Don, anything on my Issue (x-compiler for Mac)?
One System to rule them all, One IDE to find them,
One Code to bring them all, and to the Framework bind them,
in the Land of Redmond, where the Windows lie
---------------------------------------------------------------------
People call me crazy, because i'm jumping out of perfectly fine aircraft

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1345
Re: Fpcupdeluxe
« Reply #1687 on: September 09, 2020, 08:05:00 am »
@Zvoni
To help you, I must be able to reproduce your issue.
To reproduce, I need to know your base system and what version of FPC (and Lazarus) you are building.

Zvoni

  • Sr. Member
  • ****
  • Posts: 408
Re: Fpcupdeluxe
« Reply #1688 on: September 09, 2020, 12:27:18 pm »
@Zvoni
To help you, I must be able to reproduce your issue.
To reproduce, I need to know your base system and what version of FPC (and Lazarus) you are building.
Manjaro Cinnamon (Linux 5.8.3)
Laz2.0.11-FPC3.2.1 (--> "fixes" for both)

My Issue with ocxcross  is before i use fpcupdeluxe!
I followed the steps described on your github, with the exception that i use stock llvm and clang.
The problem is not with fpcupdeluxe, but with compiling the cctools
One System to rule them all, One IDE to find them,
One Code to bring them all, and to the Framework bind them,
in the Land of Redmond, where the Windows lie
---------------------------------------------------------------------
People call me crazy, because i'm jumping out of perfectly fine aircraft

Zvoni

  • Sr. Member
  • ****
  • Posts: 408
Re: Fpcupdeluxe
« Reply #1689 on: September 11, 2020, 10:50:45 am »
My Issue with cross-compiler for darwin is solved.
This time, I actually followed the compiling instructions for cctools (instead of ocxcross). After successful configure/make/make install i fired up fpcupdeluxe, and let it do its automagic (incl downloading the SDK?), and it compiled!
One System to rule them all, One IDE to find them,
One Code to bring them all, and to the Framework bind them,
in the Land of Redmond, where the Windows lie
---------------------------------------------------------------------
People call me crazy, because i'm jumping out of perfectly fine aircraft

ASBzone

  • Sr. Member
  • ****
  • Posts: 476
  • Automation leads to relaxation...
    • Free BrainWaveCC Console Utilities
Re: Fpcupdeluxe
« Reply #1690 on: September 16, 2020, 11:12:48 pm »


Code: [Select]
ERROR: Fpcupdeluxe fatal error !
Sequencer (UserIDE): Failure running fpcupdeluxe: error executing sequence UserIDE
Sequencer (Lazarus): Failure running fpcupdeluxe: error executing sequence Lazarus
Sequencer (Only): Failure running fpcupdeluxe: error executing sequence Only

TRIED Stable, works fine!


I am seeing the same problem with v1.8.0a and v1.8.0e on 64-bit Windows 10
-ASB: https://www.BrainWaveCC.com

Lazarus v2.0.11 r63516 / FPC v3.2.1-r46879 (via FpcUpDeluxe) -- Windows 64-bit install w/32-bit cross-compile
Primary System: Windows 10 Pro x64, Version 2004 (Build 19041.508)
Other Systems: Windows 10 Pro x64, Version 2004 or greater

ASBzone

  • Sr. Member
  • ****
  • Posts: 476
  • Automation leads to relaxation...
    • Free BrainWaveCC Console Utilities
Re: Fpcupdeluxe
« Reply #1691 on: September 16, 2020, 11:14:07 pm »
I can confirm that fixes/fixes is a no-go at the moment !
Looking into it right now. It seems that FPC cannot find its own config file. Reason unknown [yet].
I wish I had looked before I tried to update. :) 

But I have a backup, so...

Also, I was able to install Fixes FPC alone, although Fixes/Fixes failed if done together.  Lazarus Fixes fails, of course, no matter whether it is done alone or in tandem with FPC.

I successfully rolled my config back to what it was previously (shown in my sig), so I am fine now.

Hope this helps.
« Last Edit: September 17, 2020, 01:12:05 am by ASBzone »
-ASB: https://www.BrainWaveCC.com

Lazarus v2.0.11 r63516 / FPC v3.2.1-r46879 (via FpcUpDeluxe) -- Windows 64-bit install w/32-bit cross-compile
Primary System: Windows 10 Pro x64, Version 2004 (Build 19041.508)
Other Systems: Windows 10 Pro x64, Version 2004 or greater

totya

  • Hero Member
  • *****
  • Posts: 636
Re: Fpcupdeluxe
« Reply #1692 on: September 24, 2020, 07:33:06 pm »
I can confirm that fixes/fixes is a no-go at the moment !
Looking into it right now. It seems that FPC cannot find its own config file. Reason unknown [yet].

Hi, any news for this strange bug?

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1345
Re: Fpcupdeluxe
« Reply #1693 on: September 24, 2020, 09:18:43 pm »
Quote
Hi, any news for this strange bug?
The [only] progress until now: the bug only happens on Windows.

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1345
Re: Fpcupdeluxe
« Reply #1694 on: September 24, 2020, 09:54:03 pm »
I think this bugger is related: https://bugs.freepascal.org/view.php?id=35991

 

TinyPortal © 2005-2018