Recent

Author Topic: Fpcupdeluxe  (Read 356412 times)

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1121
Re: Fpcupdeluxe
« Reply #1260 on: May 14, 2019, 06:09:15 pm »
Yep. I have seen that eternallybored is down.
But fpcupdeluxe should just continue after a while !

totya

  • Hero Member
  • *****
  • Posts: 577
Re: Fpcupdeluxe
« Reply #1261 on: May 14, 2019, 08:43:46 pm »
Yep, but indy.fulgan.com isn't down, and built in downloader do not do anything...

totya

  • Hero Member
  • *****
  • Posts: 577
Re: Fpcupdeluxe
« Reply #1262 on: May 14, 2019, 10:37:33 pm »
Okay after some time, fpc(only) 3.0.4 installed. But after Lazarus(only) 2.0.2 install failed:

..ooops I cant find the log... rerun fpcupdeluxe, after copy log from the window.... see attached file.

What is the problem with the RX modules?

Edit1.:
With clean config_lazarus directory (install without old config), Lazarus install is success...

Edit2.:
After Lazarus 2.0.2 installed, I tried to install only fixes 2.0, the result:
Quote
fpcupdeluxe: ERROR: LazarusNativeInstaller (CheckModule: Lazarus): sources error (URL mismatch).
fpcupdeluxe: ERROR: LazarusNativeInstaller (CheckModule: Lazarus): desired URL=https://svn.freepascal.org/svn/lazarus/branches/fixes_2_0
fpcupdeluxe: ERROR: LazarusNativeInstaller (CheckModule: Lazarus): source URL=https://svn.freepascal.org/svn/lazarus/tags/lazarus_2_0_2/
ERROR: Fpcupdeluxe fatal error !

So, I can't update Lazarus?
« Last Edit: May 14, 2019, 11:10:04 pm by totya »

giahung1997

  • Full Member
  • ***
  • Posts: 113
Re: Fpcupdeluxe
« Reply #1263 on: May 15, 2019, 03:43:16 am »
I have added a NetBSD x86_64 binary of fpcupdeluxe.

https://github.com/LongDirtyAnimAlf/fpcupdeluxe/releases/download/1.6.2u/fpcupdeluxe-x86_64-netbsd

It has been made by cross-compiling from Windows towards NetBSD.
Its just a proof of concept.
Due to the fact that it runs 100%, but does not work ... ;-)

Fpcupdeluxe makes extensive use of TProcess.
And TProcess (trunk) fails to function correct on NetBSD (on my VM-system at least [NetBSD 8, with Mate]).
Please try with NetBSD current (8.99). They made some changes with libpthread to supports C11 thread. I think it is related.
Is it still failed to work with the latest snapshot of NetBSD current? I guessed there's something wrong with libc on NetBSD 8.

https://www.netbsd.org/releases/current.html
Hate me? I'm gone. You will never see me again. Fuck the people of this forum! Fuck this Lazarus! Fuck Pascal!

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1121
Re: Fpcupdeluxe
« Reply #1264 on: May 15, 2019, 07:00:22 am »
@totya
As the output shows: Lazarus 2.0.2 and Lazarus fixes 2.0 have different (svn) URL's.

https://svn.freepascal.org/svn/lazarus/tags/lazarus_2_0_2
https://svn.freepascal.org/svn/lazarus/branches/fixes_2_0

You cannot install them in the same directory: URL mismatch.
Just choose a different install root-directory for these two Lazarus versions.
« Last Edit: May 15, 2019, 07:03:18 am by DonAlfredo »

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1121
Re: Fpcupdeluxe
« Reply #1265 on: May 15, 2019, 07:01:09 am »
@giahung1997
If I can find the time, I will try NetBSD latest.

giahung1997

  • Full Member
  • ***
  • Posts: 113
Re: Fpcupdeluxe
« Reply #1266 on: May 15, 2019, 05:28:37 pm »
@giahung1997
If I can find the time, I will try NetBSD latest.
Thanks. I'll track this thread  :)
Hate me? I'm gone. You will never see me again. Fuck the people of this forum! Fuck this Lazarus! Fuck Pascal!

giahung1997

  • Full Member
  • ***
  • Posts: 113
Re: Fpcupdeluxe
« Reply #1267 on: May 19, 2019, 06:26:29 pm »
When will we have next version of NewPascal? Sorry for being offtopic here. But I found NewPascal doesn't have Dynamic Library project type like normal Lazarus. Does my eyes just be problematic? If I'm right, why? I liked to do many weird things. Like tried to use gtk2 widgetset on Windows. I set up everything right and normal Lazarus compiled the sample gui app just fine but NewPascal give me a bunch of errors, weird.
Hate me? I'm gone. You will never see me again. Fuck the people of this forum! Fuck this Lazarus! Fuck Pascal!

DonAlfredo

  • Hero Member
  • *****
  • Posts: 1121
Re: Fpcupdeluxe
« Reply #1268 on: May 20, 2019, 02:00:06 pm »
At this moment, NewPascal is not maintained.
You can ask forum member hnb (pm) for his future plans regarding NewPascal.

hnb

  • Sr. Member
  • ****
  • Posts: 268
Re: Fpcupdeluxe
« Reply #1269 on: May 20, 2019, 02:21:53 pm »
The project is frozen since latest big misunderstanding with one of main FPC developer. I want to act in rational manner. After cool-down period (there was a lot of emotions), I was asking about possibility of my participation, cooperation and future related to FPC compiler and NewPascal projects at 22 March 2019, without any clear answer until today. I didn't decide yet what to do next.
Checkout NewPascal initiative and donate beer - ready to use tuned FPC compiler + Lazarus for mORMot project

best regards,
Maciej Izak

josh

  • Hero Member
  • *****
  • Posts: 750
Re: Fpcupdeluxe
« Reply #1270 on: May 20, 2019, 09:16:41 pm »
Hi

Just updated lazarus and FPC both trunk (64bit windows).

FPCUPDELUXE finished without error, and buiult lazarus.

However when I run startlazarus, I get a PopUp Error Message 'Buffer Error' and can no longer run it.

Is this an FPCUPDELUXE error or a TRUNK Error.

Development Installation Lazarus 1.3, FPC 2.7.1,Windows 7/8 32/64, OSX, *nix

Test Environment Lazarus & FPC Trunk on Windows and OSX (Cocoa Mainly on OSX). Testing also Crosscompile windows to OSX.. 
Any posts made from 2015 will be based on Lazarus Trunk.

lucamar

  • Hero Member
  • *****
  • Posts: 1984
Re: Fpcupdeluxe
« Reply #1271 on: May 20, 2019, 09:20:41 pm »
However when I run startlazarus, I get a PopUp Error Message 'Buffer Error' and can no longer run it.

You're not the only one: see here Lazarus Buffer Error
« Last Edit: May 21, 2019, 01:52:48 am by lucamar »
Turbo Pascal 3 CP/M - Amstrad PCW 8256 (512 KB !!!) :P
Lazarus 2.0.2/2.0.4  - FPC 3.0.4 on:
(K|L)Ubuntu 12..16, Windows XP SP3, various DOSes.

valdir.marcos

  • Hero Member
  • *****
  • Posts: 795
Re: Fpcupdeluxe
« Reply #1272 on: May 21, 2019, 01:51:00 am »
However when I run startlazarus, I get a PopUp Error Message 'Buffer Error' and can no longer run it.
You're not the only one: see here Lazarus Buffer Error
I'm sorry, but your link seems to be misspelled.

Lazarus Buffer error
https://forum.lazarus.freepascal.org/index.php/topic,45473.0.html

0035576: r42042-r42049 prevent Lazarus (i386) from starting
https://bugs.freepascal.org/view.php?id=35576

lucamar

  • Hero Member
  • *****
  • Posts: 1984
Re: Fpcupdeluxe
« Reply #1273 on: May 21, 2019, 01:54:23 am »
I'm sorry, but your link seems to be misspelled.

Oops! Yeah, sorry: got a couple double-quotes by mistake :-[ Corrected now, thanks.
Turbo Pascal 3 CP/M - Amstrad PCW 8256 (512 KB !!!) :P
Lazarus 2.0.2/2.0.4  - FPC 3.0.4 on:
(K|L)Ubuntu 12..16, Windows XP SP3, various DOSes.

macfly

  • New member
  • *
  • Posts: 9
Re: Fpcupdeluxe
« Reply #1274 on: May 21, 2019, 09:43:46 pm »
Hi guys,

I'm trying to install Lazarus for a few days, but there is always a time out error.

Is there any way to deploy the files in the local directories to prevent it from trying to get from SVN tree?

Code: [Select]
Executing: C:\Program Files\TortoiseSVN\bin\svn.exe cleanup --non-interactive C:\Dev\FPCUPDeluxe\Stable\fpcsrc (working dir: )
Executing: C:\Program Files\TortoiseSVN\bin\svn.exe update --quiet --non-interactive --trust-server-cert -r HEAD C:\Dev\FPCUPDeluxe\Stable\fpcsrc (working dir: )
svn: E175012: Connection timed out
Executing: C:\Program Files\TortoiseSVN\bin\svn.exe checkout --quiet --non-interactive --trust-server-cert -r HEAD https://svn.freepascal.org/svn/fpc/branches/fixes_3_0/ C:\Dev\FPCUPDeluxe\Stable\fpcsrc (working dir: )
svn: E155004: Run 'svn cleanup' to remove locks (type 'svn help cleanup' for details)
svn: E155004: Working copy 'C:\Dev\FPCUPDeluxe\Stable\fpcsrc' locked.
svn: E155004: 'C:\Dev\FPCUPDeluxe\Stable\fpcsrc' is already locked.
Executing: C:\Program Files\TortoiseSVN\bin\svn.exe cleanup --non-interactive C:\Dev\FPCUPDeluxe\Stable\fpcsrc (working dir: )
Executing: C:\Program Files\TortoiseSVN\bin\svn.exe update --quiet --non-interactive --trust-server-cert -r HEAD C:\Dev\FPCUPDeluxe\Stable\fpcsrc (working dir: )
svn: E175012: Connection timed out
Executing: C:\Program Files\TortoiseSVN\bin\svn.exe info C:\Dev\FPCUPDeluxe\Stable\fpcsrc (working dir: )
Path: Stable\fpcsrc
Working Copy Root Path: C:\Dev\FPCUPDeluxe\Stable\fpcsrc
URL: https://svn.freepascal.org/svn/fpc/branches/fixes_3_0
Relative URL: ^/branches/fixes_3_0
Repository Root: https://svn.freepascal.org/svn/fpc
Repository UUID: 3ad0048d-3df7-0310-abae-a5850022a9f2
Revision: 42112
Node Kind: directory
Schedule: normal

fpcupdeluxe: info: FPCNativeInstaller (DownloadFromSVN: FPC): SVN gave error code: 1

fpcupdeluxe: info: FPCNativeInstaller (DownloadFromSVN: FPC): SVN gave error message: Path: Stable\fpcsrc
Working Copy Root Path: C:\Dev\FPCUPDeluxe\Stable\fpcsrc
URL: https://svn.freepascal.org/svn/fpc/branches/fixes_3_0
Relative URL: ^/branches/fixes_3_0
Repository Root: https://svn.freepascal.org/svn/fpc
Repository UUID: 3ad0048d-3df7-0310-abae-a5850022a9f2
Revision: 42112
Node Kind: directory
Schedule: normal


fpcupdeluxe: info: FPCNativeInstaller (GetModule: FPC): FPC was at: failure

fpcupdeluxe: info: FPCNativeInstaller (GetModule: FPC): FPC is now at revision: src
W
fpcupdeluxe: ERROR: FPCNativeInstaller (GetModule: FPC): Checkout/update of FPC sources failure.


ERROR: Fpcupdeluxe fatal error !
« Last Edit: May 21, 2019, 10:18:34 pm by macfly »