Recent

Author Topic: Arduino  (Read 8217 times)

herux

  • Full Member
  • ***
  • Posts: 101

jb007

  • Full Member
  • ***
  • Posts: 106
Re: Arduino
« Reply #16 on: August 08, 2016, 10:07:27 pm »
After a break, got some significant progress!

Value of 3 ScrollBars is sended by RS232 to my Arduino.
At 3 LedBars, the values are displayed as (0-255) values.
( gonna be in 0 to 8 led's later as is it showing an audio-level-indicater )

In Lazarus the refresh rate is 10/sec. Only the value of the last changed Scrollbar is sended to Arduino. At my Lazarus INIT al of the 3 wil be sended!
to DIY or not to DIY

jb007

  • Full Member
  • ***
  • Posts: 106
Re: Arduino
« Reply #17 on: August 08, 2016, 10:07:57 pm »
I'm using

1 byte as LedbarNumber and

3 bytes as LedBarValue.

The string 'el' (end-line) is added as delimiter.

I'm very happy I got this far programming RS232.

Next step is to controll my robotArm by PC-RS232-Arduino!


Fortunately I got the major part for controlling my robotArm allready
coded in TurbuPascal7.0 and the control is done by ISA/ 82c55a.

The whole ForWard/BackWard-Kinematics, stepperControl and overal mathematics for Interpolation/Integral/Differential for creating a path in 3d.

http://europakade.nl/motion-control-an-robots/robot-arm

https://www.youtube.com/playlist?list=PL7iWs5bvJdxs91kCZUV9P6KuG4mvriLgJ
to DIY or not to DIY

jb007

  • Full Member
  • ***
  • Posts: 106
Re: Arduino
« Reply #18 on: August 25, 2017, 07:14:42 pm »
Hi,

allready some time ago but I wanted this tho share with you:


For programming my Arduino's, I'm using mikroPascal for AVR.

On my pc: got Lazarus running very smooth!

On my raspberry PI's: got Lazarus running and did some first tests.

Kind regards.



to DIY or not to DIY

 

TinyPortal © 2005-2018