Few days ago I bought SSD and installed fresh ArchLinux on it. Today I installed these multilib packages:
- binutils-multilib
- gcc-libs-multilib
- gcc-multilib
Also I insalled package fpc and built FreePascal 2.5.1 using this script:
export PPCBIN="ppcx64"
if [ -d ./fixes_2_6 ]; then
svn update ./fixes_2_6
else
svn co http://svn.freepascal.org/svn/fpc/branches/fixes_2_6 ./fixes_2_6
fi
cd ./fixes_2_6
make FPC=/usr/lib/fpc/2.4.4/$PPCBIN build OS_TARGET=linux CPU_TARGET=i386 CROSSOPT="-XP"
sudo make FPC=`pwd`/compiler/ppcross386 PREFIX=/opt/fpc crossinstall OS_TARGET=linux CPU_TARGET=i386 CROSSOPT="-XP"
sudo make distclean
Then I created symlink for this version. For switching between different versions of FreePascal I use this script(this one switch me to FreePascal 2.5.1):
sudo ln -sf /opt/fpc/lib/fpc/2.5.1/ppcx64 /usr/bin/ppcx64
sudo ln -sf /opt/fpc/lib/fpc/2.5.1/ppcross386 /usr/bin/ppc386
sudo ln -sf /opt/fpc/lib/fpc/2.5.1/ppcrossarm /usr/bin/ppcarm
mv ~/fpc.cfg ~/.fpc.cfg
And this one for back to FreePascal 2.4.4:
sudo ln -sf /usr/lib/fpc/2.4.4/ppcx64 /usr/bin/ppcx64
sudo ln -sf /usr/lib/fpc/2.4.4/ppcross386 /usr/bin/ppc386
sudo ln -sf /usr/lib/fpc/2.4.4/ppcrossarm /usr/bin/ppcarm
mv ~/.fpc.cfg ~/fpc.cfg
You will be needed only second line and last line. Content of mine fpc.cfg in $HOME directory(also you can add option "-Xd", but I use it separately in Makefile's/etc. of my projects):
#
# Config file generated by fpcmkcfg on 9-11-11 - 22:08:31
# Example fpc.cfg for Free Pascal Compiler
#
# ----------------------
# Defines (preprocessor)
# ----------------------
#
# nested #IFNDEF, #IFDEF, #ENDIF, #ELSE, #DEFINE, #UNDEF are allowed
#
# -d is the same as #DEFINE
# -u is the same as #UNDEF
#
#
# Some examples (for switches see below, and the -? helppages)
#
# Try compiling with the -dRELEASE or -dDEBUG on the commandline
#
# For a release compile with optimizes and strip debuginfo
#IFDEF RELEASE
-O2
-Xs
#WRITE Compiling Release Version
#ENDIF
# For a debug version compile with debuginfo and all codegeneration checks on
#IFDEF DEBUG
-glh
-Crtoi
#WRITE Compiling Debug Version
#ENDIF
# ----------------
# Parsing switches
# ----------------
# Pascal language mode
# -Mfpc free pascal dialect (default)
# -Mobjfpc switch some Delphi 2 extensions on
# -Mdelphi tries to be Delphi compatible
# -Mtp tries to be TP/BP 7.0 compatible
# -Mgpc tries to be gpc compatible
# -Mmacpas tries to be compatible to the macintosh pascal dialects
#
# Turn on Object Pascal extensions by default
#-Mobjfpc
# Assembler reader mode
# -Rdefault use default assembler
# -Ratt read AT&T style assembler
# -Rintel read Intel style assembler
#
# All assembler blocks are AT&T styled by default
#-Ratt
# Semantic checking
# -S2 same as -Mobjfpc
# -Sc supports operators like C (*=,+=,/= and -=)
# -Sa include assertion code.
# -Sd same as -Mdelphi
# -Se<x> compiler stops after the <x> errors (default is 1)
# -Sg allow LABEL and GOTO
# -Sh Use ansistrings
# -Si support C++ styled INLINE
# -SI<x> set interface style to <x>
# -SIcomCOM compatible interface (default)
# -SIcorbaCORBA compatible interface
# -Sm support macros like C (global)
# -So same as -Mtp
# -Sp same as -Mgpc
# -Ss constructor name must be init (destructor must be done)
#
# Allow goto, inline, C-operators, C-vars
-Sgic
# ---------------
# Code generation
# ---------------
# Uncomment the next line if you always want static/dynamic units by default
# (can be overruled with -CD, -CS at the commandline)
#-CS
#-CD
# Set the default heapsize to 8Mb
#-Ch8000000
# Set default codegeneration checks (iocheck, overflow, range, stack)
#-Ci
#-Co
#-Cr
#-Ct
# Optimizer switches for i386 compiler
# -Os generate smaller code
# -O1 level 1 optimizations (quick optimizations)
# -O2 level 2 optimizations (-O1 + slower optimizations)
# -O3 level 3 optimizations (same as -O2u)
# -Oa=N set alignment to N
# -OoX switch on optimalization X.
# -OoNOX switch off optimalization X.
# X is one of REGVAR UNCERTAIN STACKFRAME PEEPHOLE ASMCSE LOOPUNROLL
# -OpCPU set target processor.
# CPU is one of 386, PENTIUM, PENTIUM2, PENTIUM3, PENTIUM4, PENTIUMM
# -----------------------
# Set Filenames and Paths
# -----------------------
# Both slashes and backslashes are allowed in paths
# path to the messagefile, not necessary anymore but can be used to override
# the default language
#-Fr/opt/fpc/lib/fpc/$fpcversion/msg/errore.msg
#-Fr/opt/fpc/lib/fpc/$fpcversion/msg/errorn.msg
#-Fr/opt/fpc/lib/fpc/$fpcversion/msg/errores.msg
#-Fr/opt/fpc/lib/fpc/$fpcversion/msg/errord.msg
#-Fr/opt/fpc/lib/fpc/$fpcversion/msg/errorr.msg
# searchpath for units and other system dependent things
-Fu/opt/fpc/lib/fpc/$fpcversion/units/$FPCTARGET/
-Fu/opt/fpc/lib/fpc/$fpcversion/units/$FPCTARGET/*
-Fu/opt/fpc/lib/fpc/$fpcversion/units/$FPCTARGET/rtl
#IFDEF FPCAPACHE_1_13
-Fu/opt/fpc/lib/fpc/$fpcversion/units/$FPCTARGET/httpd13/
#ELSE
#IFDEF FPCAPACHE_2_0
-Fu/opt/fpc/lib/fpc/$fpcversion/units/$FPCTARGET/httpd20
#ELSE
-Fu/opt/fpc/lib/fpc/$fpcversion/units/$FPCTARGET/httpd22
#ENDIF
#ENDIF
# path to the gcclib
#ifdef cpui386
-Fl/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/32
-Fl/usr/lib32
#endif
#ifdef cpux86_64
-Fl/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2
#endif
# searchpath for libraries
#-Fl/opt/fpc/lib/fpc/$fpcversion/lib
#-Fl/lib;/usr/lib
# searchpath for tools
-FD/opt/fpc/lib/fpc/$fpcversion/bin/$FPCTARGET
#IFNDEF CPUI386
#IFNDEF CPUAMD64
#DEFINE NEEDCROSSBINUTILS
#ENDIF
#ENDIF
#IFNDEF Linux
#DEFINE NEEDCROSSBINUTILS
#ENDIF
# binutils prefix for cross compiling
#IFDEF FPC_CROSSCOMPILING
#IFDEF NEEDCROSSBINUTILS
-XP$FPCTARGET-
#ENDIF
#ENDIF
# -------------
# Linking
# -------------
# generate always debugging information for GDB (slows down the compiling
# process)
# -gc generate checks for pointers
# -gd use dbx
# -gg use gsym
# -gh use heap trace unit (for memory leak debugging)
# -gl use line info unit to show more info for backtraces
# -gv generates programs tracable with valgrind
# -gw generate dwarf debugging info
#
# Enable debuginfo and use the line info unit by default
#-gl
# always pass an option to the linker
#-k-s
# Always strip debuginfo from the executable
-Xs
# -------------
# Miscellaneous
# -------------
# Write always a nice FPC logo ;)
-l
# Verbosity
# e : Show errors (default) d : Show debug info
# w : Show warnings u : Show unit info
# n : Show notes t : Show tried/used files
# h : Show hints m : Show defined macros
# i : Show general info p : Show compiled procedures
# l : Show linenumbers c : Show conditionals
# a : Show everything 0 : Show nothing (except errors)
# b : Show all procedure r : Rhide/GCC compatibility mode
# declarations if an error x : Executable info (Win32 only)
# occurs
#
# Display Info, Warnings, Notes and Hints
-viwn
# If you don't want so much verbosity use
#-vw
So, I don't even know what can be wrong and don't work... everything is simple, without any magic at all
Recent
