Recent

Author Topic: Failed to install Lazarus IDE on CentOS? (RPMLIB dependancy problem workaround!)  (Read 18490 times)

den4b

  • New Member
  • *
  • Posts: 13
Hi everyone,

I'm new to Lazarus on Linux, but not new to Lazarus and Linux on their own. I successfully installed Lazarus on Ubuntu platform and it went without a hitch. After installation links were added to the programming menu. IDE works.

Today, I tried installing Lazarus on CentOS 5.5. I downloaded and installed all 3 packages: fpc-src-2.2.4-0.i386.rpm, fpc-2.2.4-0.i386.rpm, lazarus-0.9.28.2-0.i586.rpm. Installation did not report any problems (apart from "not signed" confirmation).

I found FPC in /usr/bin/fpc and FPC-SOURCE in /usr/share/fpcsrc/, but there is no sign of LAZARUS except an empty folder /etc/lazarus/. I searched the whole file system for "lazarus" and "lazres" without results (except that empty folder).

Can anyone help me understand what am I doing wrong??

Thank you!
« Last Edit: January 31, 2011, 03:56:05 pm by den4b »

Marc

  • Administrator
  • Hero Member
  • *
  • Posts: 2582
Re: How to start Lazarus IDE on CentOS?
« Reply #1 on: January 31, 2011, 01:44:07 pm »
to see where rpm has installed files you can use
rpm -q -l lazarus
//--
{$I stdsig.inc}
//-I still can't read someones mind
//-Bugs reported here will be forgotten. Use the bug tracker

den4b

  • New Member
  • *
  • Posts: 13
Re: How to start Lazarus IDE on CentOS?
« Reply #2 on: January 31, 2011, 01:52:25 pm »
I executed "rpm -q -l lazarus" and it replied with "package lazarus is not installed". Very strange, because installation process reported a successful installation. I installed it in the GUI mode with root.

Should I try installing in the terminal mode? Can anyone suggest a command line?

Thank you!

den4b

  • New Member
  • *
  • Posts: 13
Re: How to start Lazarus IDE on CentOS?
« Reply #3 on: January 31, 2011, 02:29:19 pm »
I tried running "rpm -ivh lazarus-0.9.28.2-0.i586.rpm" and that produced:

Code: [Select]
error: Failed dependencies:
        rpmlib(FileDigests) <= 4.6.0-1 is needed by lazarus-0.9.28.2-0.i586

I checked version of RPMLIB and it states "RPM version 4.4.2.3". The built-in package manager reports it as being up to date. I will try to force install the later version and will report back.

den4b

  • New Member
  • *
  • Posts: 13
Re: How to start Lazarus IDE on CentOS?
« Reply #4 on: January 31, 2011, 02:33:25 pm »
I found the same problem described in a different thread:
rpmlib(FileDigests) <= 4.6.0-1 is need , both in Redhat 9 and SUSE 11

No resolution was found...

Marc

  • Administrator
  • Hero Member
  • *
  • Posts: 2582
Re: How to start Lazarus IDE on CentOS?
« Reply #5 on: January 31, 2011, 02:57:32 pm »
if this is the only failing dependency, you can try "rpm -ivh --nodeps lazarus-0.9.28.2-0.i586.rpm"
to skip dependency checking. I see no reason why we require certain rpm versions
//--
{$I stdsig.inc}
//-I still can't read someones mind
//-Bugs reported here will be forgotten. Use the bug tracker

den4b

  • New Member
  • *
  • Posts: 13
Re: How to start Lazarus IDE on CentOS?
« Reply #6 on: January 31, 2011, 03:39:56 pm »
Code: [Select]
[root@localhost ~]# rpm -ivh --nodeps lazarus-0.9.28.2-0.i586.rpm
Preparing...                ########################################### [100%]
   1:lazarus                ########################################### [100%]
error: unpacking of archive failed on file /etc/lazarus/editoroptions.xml;4d46c844:
cpio: MD5 sum mismatch

The dependency error is logical because the RPM packager used for creating the package is newer and probably uses new features which are not available in current RPM library. This might explain the failed checksum.

I also tried YUM and it also complained about the same dependency:

Code: [Select]
[root@localhost ~]# yum --nogpgcheck install lazarus-0.9.28.2-0.i586.rpm
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * addons: mirror.netrino.co.uk
 * base: mirror.sov.uk.goscomb.net
 * extras: mirror.netrino.co.uk
 * updates: ftp.heanet.ie
Setting up Install Process
Examining lazarus-0.9.28.2-0.i586.rpm: lazarus-0.9.28.2-0.i586
Marking lazarus-0.9.28.2-0.i586.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package lazarus.i586 0:0.9.28.2-0 set to be updated
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package       Arch       Version          Repository                      Size
================================================================================
Installing:
 lazarus       i586       0.9.28.2-0       /lazarus-0.9.28.2-0.i586       242 M

Transaction Summary
================================================================================
Install       1 Package(s)
Upgrade       0 Package(s)

Total size: 242 M
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
rpmlib(FileDigests) is needed by lazarus-0.9.28.2-0.i586
Complete!
(1, [u'Please report this error in https://bugzilla.redhat.com/enter_bug.cgi?
product=Red%20Hat%20Enterprise%20Linux%205&component=yum'])

den4b

  • New Member
  • *
  • Posts: 13
TEMPORARY RESOLUTION
« Reply #7 on: January 31, 2011, 03:53:05 pm »
I found a TEMPORARY RESOLUTION!

I extracted RPM package using the standard archive manager (File Roller 2.16.0) and it WORKED! Even the icon in the Applications -> Programming -> Lazarus have appeared! I started the IDE and compiled the example project with one form = all works!! :)

You must install all 3 packages using a standard package manager and then extract the contents of lazarus package manually, below are the steps.

1) Install fpc-2.2.4-0.i386.rpm,
2) Install fpc-src-2.2.4-0.i386.rpm,
3) Install lazarus-0.9.28.2-0.i586.rpm (this step is still necessary because it will install all of the dependencies, but will fail to install the lazarus itself)
4) Manually extract contents of lazarus-0.9.28.2-0.i586.rpm, using a standard archive manager.

Nevertheless, the dependency problem for installing directly via RPM or YUM needs some resolution!

Maybe developers can comment on this?
« Last Edit: January 31, 2011, 04:57:31 pm by den4b »

JuhaManninen

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4459
  • I like bugs.
Re: TEMPORARY RESOLUTION
« Reply #8 on: February 03, 2011, 02:00:31 pm »
Maybe developers can comment on this?

FPC 2.2.4 and Lazarus 0.9.28.2 are rather old and not much energy should be wasted with them now.
There is a new Lazarus release coming, I hope it will improve the installation on CentOS.

If you want to see how much Lazarus has improved, you can do it already before the release.
Just install the latest FPC 2.4.2 release and its source package from repo or from an RPM.
Then in ~:
$  svn co http://svn.freepascal.org/svn/lazarus/trunk lazarus
$ cd lazarus
$ make all
$ ./lazarus &

You must have gtk2-devel (or similar) package installed when compiling Lazarus. This is true also for the older 0.9.28 release.
Make sure you don't have many versions of FPC or Lazarus installed at the same time (to avoid potential problems).

Juha
Mostly Lazarus trunk and FPC 3.2 on Manjaro Linux 64-bit.

 

TinyPortal © 2005-2018