Recent

Author Topic: Big CAD translation from Delphi6+G32  (Read 1498 times)

emjtech

  • New Member
  • *
  • Posts: 28
    • Global R&D ltd
Big CAD translation from Delphi6+G32
« on: January 17, 2019, 08:44:38 am »
Hi
Even I am an hardware engineer I write some software.
On 2007 I write the basics of a good Electronics CAD, and I completed it over the years while I work till now.
Now is the Best CAD, incomparable to smaller CADs (like OrCAD) I called it CAEdraw.
I wrote that using Delphi 6 + other libraries : G32 for fast graphics , Hipergrid , DragDrop , ExColorGrip , Thtml , JEDI and some mine.

I want to move the code to Lazarus, at least I will need a Fast graphics library since the CAD displays images limited in size only by the available memory.
Currently because of the limitations of Delphi 6 +G32 is 3Gby , one motivation for the translation is overcome that limitation and be able to display up to 60Gby of graphics, however to move such big canvas the interface should be fast and he should use the GPU.

Can someone recommend me a Fast graphics unit?
Any tips are welcome, this translation will be a BIG task.

Thanks
Thanks
Eli Jacob

Handoko

  • Hero Member
  • *****
  • Posts: 5122
  • My goal: build my own game engine using Lazarus

emjtech

  • New Member
  • *
  • Posts: 28
    • Global R&D ltd
Re: Big CAD translation from Delphi6+G32
« Reply #2 on: January 17, 2019, 09:12:14 am »
Sorry I was thinking "Translation" referred to software translation, no language, therefore I posted it wrong.
Is there a Way I can remove a post if I make such error?
Thanks
Eli Jacob

Handoko

  • Hero Member
  • *****
  • Posts: 5122
  • My goal: build my own game engine using Lazarus
Re: Big CAD translation from Delphi6+G32
« Reply #3 on: January 17, 2019, 09:27:42 am »
Contact the moderators, you can know them by looking at their name, which use different color.

emjtech

  • New Member
  • *
  • Posts: 28
    • Global R&D ltd
Re: Big CAD translation from Delphi6+G32
« Reply #4 on: January 17, 2019, 09:29:16 am »
OK, Thanks, and sorry for the double post
Thanks
Eli Jacob

marcov

  • Administrator
  • Hero Member
  • *
  • Posts: 11351
  • FPC developer.
Re: Big CAD translation from Delphi6+G32
« Reply #5 on: January 17, 2019, 09:31:39 am »
Shall I remove this post, and move the other post from translations to here? It already has meaningful replies.

 

TinyPortal © 2005-2018